duck holder instructions
Duck Holder Installation
Duck Holder Installation
Duck Holder Installation
Straighten the duck holder by bending it in the opposite direction of its original bent shape.
Insert the duck peg into the bottom of the duck hole located on bottom of duck halfway only so it can slide onto duck holder. Test the duck peg on the holder by sliding it onto the duck holder track.
Vent Installation
Duck Holder Installation
Duck Holder Installation
Place the vent clips one on each end and one in the center. If needed, wiggle them slightly to secure them. Some vent clips do not need to be pushed onto vent they can just be placed inside of area of vent. Test the duck holder and adjust the vent clips as needed remove the repositioning double-stick tape position the holder on top of the vent clips apply pressure.
Dashboard Installation
Duck Holder Installation
Dashboard Installation
Apply repositioning double-stick tapes to the duck holder's bottom flat side, one on each end and one in the center. Clean the installation surface using a prep pad, ensuring it's free from debris and oil’s, if necessary, use an all-purpose cleaner before the prep pad. Once the surface is dry, remove the repositioning double-stick tape
Apply repositioning double-stick tapes to the duck holder's bottom flat side, one on each end and one in the center. Clean the installation surface using a prep pad, ensuring it's free from debris and oil’s, if necessary, use an all-purpose cleaner before the prep pad. Once the surface is dry, remove the repositioning double-stick tape from the duck holder's back. Slide the ducks onto the duck holder. Place the holder in the desired location.